GE AKTAexplorer 100 Air FPLC System

GE AKTAexplorer 100 Air FPLC System

**This has been tested for basic functionality and is deemed to be in working condition. System will need to be validated/calibrated to ensure accurate results. See pictures for details. FOB: FRANKLIN, MA

GE AKTAexplorer 100 Air FPLC System

KTA explorer is a fully automated liquid chromatography system designed for method development and research applications. The system simplifies the transition from laboratory to full scale production. Scale-up to production is predictable and trouble-free.

KTA explorer chromotography systems are designed for fast development and optimization of any biomolecular purification, using one working platform for all techniques and samples. The method wizard and optimized system configurations, allow rapid media screening, method scouting, method optimization, and scale-up experiments.

Standard system configurations are available to suit most purification needs, but are easily modified if required. Systems can be used at flow rates up to 100 ml/min (pressure 10 MPa) to ensure minimized run times at maximum flow rates or at 10 ml/min (pressure 25 MPa) for applications routinely using columns that generate higher backpressures. Preparation times are minimized while accuracy and reproducibility of results are assured.

Features:

Flow rates and pressures up to: 100 ml/min and 10 MPa in KTAexplorer 100 (P-901)
BufferPrep for fast pH optimization.

GE AKTAexplorer 100 Air FPLC System

KTA explorer is a fully automated liquid chromatography system designed for method development and research applications. The system simplifies the transition from laboratory to full scale production. Scale-up to production is predictable and trouble-free.

KTA explorer chromotography systems are designed for fast development and optimization of any biomolecular purification, using one working platform for all techniques and samples. The method wizard and optimized system configurations, allow rapid media screening, method scouting, method optimization, and scale-up experiments.

Standard system configurations are available to suit most purification needs, but are easily modified if required. Systems can be used at flow rates up to 100 ml/min (pressure 10 MPa) to ensure minimized run times at maximum flow rates or at 10 ml/min (pressure 25 MPa) for applications routinely using columns that generate higher backpressures. Preparation times are minimized while accuracy and reproducibility of results are assured.

Features:

Flow rates and pressures up to: 100 ml/min and 10 MPa in KTAexplorer 100 (P-901)
BufferPrep for fast pH optimization.
One working platform for all liquid chromatography techniques suitable for protein purification, from micro-gram to gram scale.
P-900Pump

The P-900 is the collective name for a pump family. It is a high
performance laboratory pump for use where accurately controlled
liquid flow is required. It is a low pulsation pump equipped with 2
pump modules; A and B. This allows for binary gradients with high pressure mixing. A pressure sensor is connected to pump module A (left hand pair of pump heads). The model installed in KTAexplorer 100 has 100 ml pump heads and is referred to as Pump P-901. P-901 has an operating flow rate range of 0.01100 ml/min in isocratic mode and 0.01100 ml/min in gradient mode, and a pressure range of 010 MPa (100 bar, 1450 psi)

Monitor UV-900

Monitor UV-900 is a multi-wavelength UV-Vis monitor that uses advanced fiber optic technology to monitor with high sensitivity at up to three wavelengths simultaneously in the wavelength range 190-700 nm. The use of fiber optics together with a unique flow cell design ensures a high signal-to-noise ratio with a minimal drift and refractive index effects. Monitor UV-900 consists of a main unit, optical fibers and a choice of two flow cells (optical pathlength 2 mm, internal volume 2 l, or pathlength 10 mm, internal volume 8 l) The 2 mm flow cell is delivered with KTAexplorer.
Monitor pH/C-900

Monitor pH/C-900 is a combined monitor for accurate, on-line monitoring of pH, conductivity and temperature in a wide range of liquid chromatography applications. Its accurate response coupled with high precision over a wide measuring range makes it ideal for use in all chromatography techniques, from reversed phase with very low conductivity eluents to hydrophobic interaction chromatography in high salt solutions. Monitor pH/C-900 consists of a control unit, a flow cell for conductivity and temperature, a flow cell with a holder for the pH electrode and the pH electrode.

One working platform for all liquid chromatography techniques suitable for protein purification, from micro-gram to gram scale.
P-900Pump

The P-900 is the collective name for a pump family. It is a high
performance laboratory pump for use where accurately controlled
liquid flow is required. It is a low pulsation pump equipped with 2
pump modules; A and B. This allows for binary gradients with high pressure mixing. A pressure sensor is connected to pump module A (left hand pair of pump heads). The model installed in KTAexplorer 100 has 100 ml pump heads and is referred to as Pump P-901. P-901 has an operating flow rate range of 0.01100 ml/min in isocratic mode and 0.01100 ml/min in gradient mode, and a pressure range of 010 MPa (100 bar, 1450 psi)

Monitor UV-900

Monitor UV-900 is a multi-wavelength UV-Vis monitor that uses advanced fiber optic technology to monitor with high sensitivity at up to three wavelengths simultaneously in the wavelength range 190-700 nm. The use of fiber optics together with a unique flow cell design ensures a high signal-to-noise ratio with a minimal drift and refractive index effects. Monitor UV-900 consists of a main unit, optical fibers and a choice of two flow cells (optical pathlength 2 mm, internal volume 2 l, or pathlength 10 mm, internal volume 8 l) The 2 mm flow cell is delivered with KTAexplorer.
Monitor pH/C-900

Monitor pH/C-900 is a combined monitor for accurate, on-line monitoring of pH, conductivity and temperature in a wide range of liquid chromatography applications. Its accurate response coupled with high precision over a wide measuring range makes it ideal for use in all chromatography techniques, from reversed phase with very low conductivity eluents to hydrophobic interaction chromatography in high salt solutions. Monitor pH/C-900 consists of a control unit, a flow cell for conductivity and temperature, a flow cell with a holder for the pH electrode and the pH electrode.

and is deemed to be in working condition. System will need to be validated/calibrated to ensure accurate results.

KTA explorer is a fully automated liquid chromatography system designed for method development and research applications. The system simplifies the transition from laboratory to full scale production. Scale-up to production is predictable and trouble-free.

KTA explorer chromotography systems are designed for fast development and optimization of any biomolecular purification, using one working platform for all techniques and samples. The method wizard and optimized system configurations, allow rapid media screening, method scouting, method optimization, and scale-up experiments.

Standard system configurations are available to suit most purification needs, but are easily modified if required. Systems can be used at flow rates up to 100 ml/min (pressure 10 MPa) to ensure minimized run times at maximum flow rates or at 10 ml/min (pressure 25 MPa) for applications routinely using columns that generate higher backpressures. Preparation times are minimized while accuracy and reproducibility of results are assured.

Features:

Flow rates and pressures up to: 100 ml/min and 10 MPa in KTAexplorer 100 (P-901)
BufferPrep for fast pH optimization.
One working platform for all liquid chromatography techniques suitable for protein purification, from micro-gram to gram scale.
P-900Pump

The P-900 is the collective name for a pump family. It is a high
performance laboratory pump for use where accurately controlled
liquid flow is required. It is a low pulsation pump equipped with 2
pump modules; A and B. This allows for binary gradients with high pressure mixing. A pressure sensor is connected to pump module A (left hand pair of pump heads). The model installed in KTAexplorer 100 has 100 ml pump heads and is referred to as Pump P-901. P-901 has an operating flow rate range of 0.01100 ml/min in isocratic mode and 0.01100 ml/min in gradient mode, and a pressure range of 010 MPa (100 bar, 1450 psi)

Monitor UV-900

Monitor UV-900 is a multi-wavelength UV-Vis monitor that uses advanced fiber optic technology to monitor with high sensitivity at up to three wavelengths simultaneously in the wavelength range 190-700 nm. The use of fiber optics together with a unique flow cell design ensures a high signal-to-noise ratio with a minimal drift and refractive index effects. Monitor UV-900 consists of a main unit, optical fibers and a choice of two flow cells (optical pathlength 2 mm, internal volume 2 l, or pathlength 10 mm, internal volume 8 l) The 2 mm flow cell is delivered with KTAexplorer.
Monitor pH/C-900

Monitor pH/C-900 is a combined monitor for accurate, on-line monitoring of pH, conductivity and temperature in a wide range of liquid chromatography applications. Its accurate response coupled with high precision over a wide measuring range makes it ideal for use in all chromatography techniques, from reversed phase with very low conductivity eluents to hydrophobic interaction chromatography in high salt solutions. Monitor pH/C-900 consists of a control unit, a flow cell for conductivity and temperature, a flow cell with a holder for the pH electrode and the pH electrode.