Invitrogen Corporation Zoom Dual Power Supply for Electrophoresis Model: ZP10001
- Make Invitrogen
- Hertz 50Hz/60Hz
- Model ZP10001
- Serial 11802A001
- Weight 29
- Voltage 120V/220V
- Working Working
- Includes Power Cord
- Warranty 30-Day Warranty, 100% Parts and Labor
- Dimensions 19×17×21 in
- Shipping Type FedEx Ground
- Item Condition Pre-owned
Invitrogen Corporation Zoom Dual Power Supply for Electrophoresis Model: ZP10001
**This unit has been tested to specifications. Has slight cosmetic blemishes from normal use. No error messages display. See photos for further details.
The high voltage/low current section is ideal for sample fractionation, IPG strips, IEF, and DNA sequencing applications. The low voltage/high current section is for SDS-PAGE, native PAGE, second dimension SDS-PAGE, DNA/RNA electrophoresis, and blotting applications. Four sets of output jacks on each side of the unit allow for multiple apparatus to run simultaneously, offering greater workflow efficiency and higher sample throughput. Microprocessor-controlled programmable power supply capable of running both high voltage/low current and high current/low voltage applications concurrently. Circuit Protection: Open Circuit; Short Circuit; Thermal Protection Over Voltage, Over Current, Overpower. Programs Stored: 15 programs, up to 6 steps each.
- High voltage/low current and low voltage/high current sides can be used independently and concurrently.
- Multiple output jacks allow for the simultaneous running of up to four electrophoresis apparatus on each side of the unit.
- Memory stores up to 30 programs (15 programs per side) of up to six steps per program. Step and ramp functions for discrete and gradual changes of electrical parameters
- No Load detection alarm system can be disabled to power high voltage applications that require very low current.
Specifications
Dual Power Supply | |
Current | 0.01–10.0 mA, adjustable in 0.01 mA increments |
Store at room temperature. | |
For Use With (Equipment) | Zoom IPG Runner System |
Voltage | 1 to 3500V |
Power | 0.1 - 35W in 0.1 W steps |
output range: Voltage | 1–250 V; adjustable in 1V steps |
Current and Power | 1–800 mA, adjustable in 1 mA increments, 1–200 W in 1 W steps |
Power Outlets | 4 pairs of terminals each |
Programs Stored | 15 programs, up to 6 steps each. |
Duration Limits | 1 to 9999 min in 1 min steps Voltage Hours, 1 to 65000 V-hr. in 1 V-hr. steps |
Operating Modes | Constant voltage, constant current, constant power |
Circuit Protection | Open Circuit; Short Circuit; Thermal Protection Over Voltage, Over Current, Overpower |
Memory Control | Non-volatile, up to 24 hours. Custom Methods Stored to RAM |
Temperature | Ambient 4-40°C |
Input Power | 110 VAC, 50–60 Hz 220 VAC, 50–60 Hz |
Fuses | One 4A/250V, one extra fuse is provided |
Power Consumption | 420 watts at maximum load |
Output Range | High Voltage / Low Current Side 1–3,500 VDC (minimum step size 1 V) 0.01–10 mA (minimum step size 0.01 mA) 0.1–35 W (minimum step size 0.1 W) Automatic crossover on reaching set limits. Low Voltage / High Current Side 1–250 VDC (minimum step size 1 V) 1–800 mA (minimum step size 1 mA) 1–200 W (minimum step size 1 W) Automatic crossover on reaching set limits. |
Accuracy | High Voltage / Low Current Side 1–1,000 VDC : ± 10 volts 1,001–3,500 VDC : ± 20 volts Low Voltage / High Current Side 1–250 VDC : ± 2 volts Duration Limits Time: 1–9,999 min Volt-hours: 1–65,000 volt-hours |
Power Outlets | 8 pairs of terminals: 4 high voltage and 4 low voltage 4 sets of electrophoretic systems can be operated under high voltage and 4 sets under low voltage conditions concurrently |
Operating Modes | Constant voltage, constant current, constant power |
Circuit Protection | Open Circuit; Short Circuit; Thermal Protection Over Voltage, Over Current, Over Power |
Safety | No Load Detection Enable/Disable Isolated Floating Ground |
Memory Control | Non-volatile, up to 24 hours Custom Methods Stored to RAM |
Memory | 15 programs on high voltage side, 15 programs on low voltage side, up to 6 steps each |
Testimonials
“REUZEit has been a great partner for our used equipment needs and always provide timely updates of new arrivals of consigned equipment.”
“Great company to work with. Tammy completed our first international equipment shipment with ease.”
“Fast response, open to adjusting schedule as needed, and great customer interaction.”