SSI Laboratory Tubbing Cutter Machine Model: TC-20

The Model TC-20 tube cutter assures a zero dead volume connection. Because tubing is held securely in a clamp vise on the vertical swing arm, a square cut is produced when the swing arm is lowered against the abrasive cutting wheel, which produces a finished end. No lubricant or cutting fluid is required.

Cuts 3 common tubing sizes

1/16″, 1/8”, and 1/4″ outside diameter tubing with inside diameters as small as 0.008″ can be smooth- cut and dressed without distortion.

Dressing tools

The precision ground dressing tool for 1/16” OD tubing is included and is attached directly to the swing arm so it cannot be misplaced or lost. Simply place the cut tubing end in the tool and rotate the knurled handle to finish both the internal and external diameters of the tubing in one operation. If desired, the dressing tool can be ordered and used separately from the tube cut-off machine. The tool for 1/8” and 1/4″ is optional.

Specifications

• Cuts 1/16", 1/8", or 1/4" tubing with inside diameter as small as 0.008"
• Electrically operated bench-top model
• Cutter Type: Dry abrasive tool
• Dressing Tool: Precision ground and Aligned hard 
• Handy 1/16" dressing tool (included) on the swing arm removes burrs and reams tubing
• Voltage selectable 110–120/220–240 volts, 50–60 Hz.