Misc. Box with ThorLabs accessories

Misc. Box with ThorLabs accessories

**Miscellaneous Box with ThorLabs parts and Accessories. Everything in pictures is included.

Box Includes:

• Fisherbrand Traceable cat no: 14-649-17, (241) 146491701, 4-CH Big Digit Timer in box, 3 new sets.
• ThorLabs C1011/M: tp02523215. Parts an d accessories ready to use for ThorLabs built platform. ThorLabs BA2T2/M: TP02430959 new packages and opened parts. ThorLabs RSHT3/M: TP02463843 new and opened accessories.
•  Set of Shank Stainless Steel Lathe Turning Tool Holder Set Cylindrical metal. 

Pillar Posts with Non-Magnetic Stainless Steel Construction

• Standard Pillar Posts can be Used to Extend the Height of Our Pedestal Posts
• Posts Designed for use with Polaris Mounts
• Construction Posts for Side or Angle Mounting
• Options with 8-32 (M4) or 1/4"-20 (M6) Taps
• Insulating Fiber Glass Posts with 1/4"-20 (M6) Taps on Both Ends
• Large-Diameter Relief Cut on Top and Bottom for Mounting Stability
• Torque Hole Provides Extra Leverage During Tightening

• Thorlabs' Ø1" (Ø25.0 mm) Pillar Posts are a basic component in any optical setup. Posts with heights between 0.5" (12.5 mm) and 12" (300 mm) are available below, as well as a variety of post construction accessories. Ø1" (Ø25 mm) posts designed to mount our Polaris mirror mounts are also available.

  Standard Ø1" (Ø25.0 mm) Posts
  Our standard Ø1" (Ø25.0 mm) posts have a tap on both the top and bottom, allowing them to be threaded to another post or optical table in any orientation. We offer posts with 8-32, M4, 1/4"-20, or M6 taps on both ends. A Ø0.24" (Ø6.0 mm) hole in the center of each post is provided so that a 3/16" (5 mm) balldriver can be used to provide extra leverage when securing a mounted component. These posts can also be mounted with arbitrary height adjustments using Ø1" post mounts or Ø1" post holders. Alternatively, our BE1 pedestal adapter, sold below, can be threaded into the end of the post for functionality similar to that of our Ø1" pedestal posts.

RSH3/M - Ø25 mm Post Holder with Flexure Lock, Pedestal Base, L = 75 mm : Post Holders with Flexure Locking Mechanism for Ø1" Posts

• Bottom-Located Tapped 1/4"-20 (M6) Mounting Hole
• Pedestal Base Compatible with PF85B, PF125B, or PF175B Clamping Fork

• Available Lengths: 1.5" (38 mm), 2" (50 mm), 3" (75 mm), and 4" (100 mm)
• Imperial and Metric Locking Options Available

These Ø1" (Ø25 mm) Post Holders are the ideal solution for mounting optical components with maximum stability and an adjustable height. They are designed to be used with our stainless steel Ø1" Posts, which are offered in a range of fixed heights. These post holders provide the same level of stability as a pillar post directly threaded into an optical table or a pedestal post secured with a clamping fork. When using a longer post, a taller post holder should also be used to ensure the greatest stability. Please see the Stability tab for more information and the results of an experiment comparing various mounting options.

The flexure design of the post holder supports the post in a clamping mechanism that is secured with an 8-32 (M4) cap screw using a 9/64" (3 mm) hex key. The circular groove in the central bore allows the metal to flex and clamp the post's position without breaking. When locked, the square groove provides two fixed contact lines with the post to maximize the clamping force. The RSHT post holders have a base with a bottom-located 1/4"-20 (M6) tapped hole for mounting. This allows these post holders to be used with our Post Holder Bases, such as the BA2. This design does not allow a post to pass all the way through the post holder and always leaves the post resting at least 0.24" (6.1 mm) above the table surface. By contrast, the RSH post holders have a pedestal base and can be easily secured to a breadboard or optical table using the PF85B, PF125B, or PF175B clamping fork. The central bore of these post holders goes through the base, allowing Ø1" posts to pass all the way through the post holder and rest on the optical table surface for minimum beam height.

Post Holders with Tapped Holes: 

• Flexure Lock Post Holders for Ø1" (Ø25 mm) Posts
• Bottom-Located 1/4"-20 (M6) Tap for Direct Mounting
• Available Lengths: 1.5" (38 mm), 2" (50 mm), 3" (75 mm), and 4" (100 mm)

RSHT post holders have a 1/4"-20 (M6) tapped hole for mounting located in the bottom of the base. These post holders can be used with our standard Post Holder Bases, such as the BA2. 

Post Holders with Pedestal Base: 

• Flexure Lock Post Holders for Ø1" (Ø25 mm) Posts
• Pedestal Base for Use with PF85B, PF125B, or PF175B Clamping Fork (Sold Separately Below)
• Post Can Pass Through Post Holder for Minimum Beam Height
• Available Lengths: 1.5" (38 mm), 2" (50 mm), 3" (75 mm), and 4" (100 mm)

RSH post holders have a pedestal base and can be easily secured to a breadboard or optical table using the PF85B, PF125B, or PF175B Clamping Forks (sold separately below). The central bore of these post holders goes through the base, allowing Ø1" posts to pass all the way through the post holder.