Bio-Tek Process HQ Disposable Flow Meter Monitor / Controller

Bio-Tek Process HQ Disposable Flow Meter Monitor / Controller

***This item is preowned with slight wear from normal use. 30-day warranty included with purchase. See photos for details.

The BioTek Systems Series 100 Flow Monitors are specifically designed to meet the demanding requirements of bio-pharmaceutical processes. They complement perfectly the Equflow single-use turbine flow meters and together, offer the most versatile and cost-effective flow measurement solution for single-use bioprocess applications. Offered in single and dual channel configurations, these monitors are factory configured to match the Equflow flow meter models of your choice, enabling turn-key operation: just plug-in the flow meter electronics, connect the flow sensor to the fluid path and you are ready to measure flow and totalize.

 Key Features & Benefits:

• Versatile single or dual independent channel design
• Large, bright dual line 6-digit readout for simultaneous flow rate and total display in a choice of engineering units
• Rate display per Second, Minute, Hour or Day
• 9-Digit Totalizer including Total, Grand Total or NonResettable Grand Total with Overflow feature
• Password protection for Total Reset available
• Programmable Displays and Function keys
• Angled consolette enclosure for easy viewing and illuminated power switch
• Liquid tight quick connect receptacles for flow meter electronics and control options
• NEMA 4X Stainless Steel construction with non-skid feet and ergonomic carrying handle for wet, corrosive environments
• Optional 2 or 4 relay (per channel) may be assigned to rate or total for pump/valve control, alarming or signaling
• Optional 4-20mA analog signal retransmission proportional to flow rate or total for connectivity to PLC/SCADA
• Optional RS232, RS-422/485 Serial Communications with Modbus® RTU Protocol

Specifications:

General

Display: Upper display: 0.60" (15 mm) high. Lower display:
0.46" (12 mm) high. Both displays are 6 digits (-99999 to
999999), red LEDs with leading zero blanking.

Display Intensity: Eight user selectable intensity levels
Display Update Rate: 5/second (200 ms)
Overrange: Display flashes 999999
Underrange: Display flashes -99999
Display Assignment: The upper and lower displays may be
assigned to rate, total, grand total, alternate rate & total,
max/min, units (small display only), set points, or Modbus
input.

Noise Filter: Programmable from 2 to 199 (0 will disable
filter)

Filter Bypass: Programmable from 0.1 to 99.9% of
calibrated span

Dimensions: 8” x 7.5” x 8.5” (203mm x 190mm x 216mm)
(W x D x H)

Ingress Protection: NEMA 4X, IP65

Environmental: Operating temperature range: -40 to 65°C.
Storage temperature range: -40 to 85°C. Relative humidity: 0
to 90% non-condensing.
Agency Approval: UL

Power: 120 VAC / 60 Hz, 40 W maximum