Teledyne Isco UA-6 Absorbance Detector with Optical Unit Type 11

Teledyne Isco UA-6 Absorbance Detector with Optical Unit Type 11

***Unit was tested as far as we could. Detector powers on without errors. Optical unit bulb is working. Unit is preowned with slight wear from normal use, (does not include chart recorder paper or flow cells) 30-day warranty included with purchase. See photos for details.

This versatile and reliable UV/Vis detector has become a standard within the industry. With the active, distortion-free filtering over a wide sensitivity and ambient temperature range, you are guaranteed accurate and trustworthy results. The 2.0 A range and 0.1 mm minimum flow cell pathlength provide readings up to 200 A/cm.

Detector can be used with virtually any fraction collector. The automatic baseline resetting and lamp life compensation, along with the slope-sensing peak detector, provide precise peaks and results. Unit requires a remote optical unit (item 01469-05), which can be used where and when you need it. Continuous pre-warming, long-life lamps, and anti-condensation protection provide years of trouble-free service.

The built-in recorder saves laboratory bench space, while also allowing you to print chromatograms even when your system is off-line. Chart recorder has a 10-cm chart width and ten recording speeds. Record events such as tube changes and sample injections with the automatic event-marking feature. Unit may also be used with an external recorder and integrator.

Manufacturer's Specifications:

• Min Wavelength (nm)214
• Max Wavelength (nm)660
• Photometric Noise<0.0001 A [ At 254nm]
• Photometric Drift<0.002 A/hr
• Photometric Accuracy±1% At 1.0 A
• Output0.01 to 1.0 V