SP VirTis AdVantage Pro Freeze Dryer ADP-S3EL-EVG-X with Pump & Dell Laptop
- Make SP Scientific
- Hertz 50Hz/60Hz
- Model ADP-S3EL-EVG-X with HiScroll 6 & Dell Laptop
- Serial 330342
- Weight 543
- Voltage 120V/220V
- Working Working
- Includes Power Cord
- Warranty 30-Day Warranty, 100% Parts and Labor
- Dimensions 34×47×48 in
- Shipping Type Freight
- Item Condition New
SP VirTis AdVantage Pro Freeze Dryer ADP-S3EL-EVG-X with Pump & Dell Laptop
***All units brand NEW in crate!
Includes:
- VirTis AdVantage Pro Freeze Dryer P/N ADP-S3EL-EVG-X
- Pfeiffer HiScroll 6 Pump P/N PDS10000
- Dell 15" Vostro 3510 Laptop
The digital revolution is here, so time for your freeze dryer to join it! The SP VirTis AdVantage Pro combines a small footprint with large capabilities, and the latest in digital technology. An innovative Intellitronics™ Controller offers you the benefits of the internet, with cycle monitoring possible on any device that can receive email - all in a benchtop unit!
- Intuitive - Intellitronics™ controller with a full-color, touch-screen display for enhanced functionality
- Easy and safe set-up - one touch start-up and shut down
- Cleanroom options - select from three configurations to suit your needs
- Compact, ergonomic design - save space
Application Examples
- Laboratory Research & Development and/or Small Production Freeze-Drying
- Diagnostic Kits
- 96 Well Plates
- Serum Bottles & Vials
- Bulk Products For Analysis – Plant Material, Organic Tissue, Waste Products
Features & Benefits
- Only 23 in (56.5 cm) wide, yet with 3 ft2 (2,766 cm2) of usable shelf area, the AdVantage Pro enables product to be safely processed using minimal bench space
- Cascade refrigeration provides a -85°C large 6L capacity condenser coil, enabling lyophilization of a wide variety of products and solvents
- Optimal heat transfer - silicone flooded shelves mean the AdVantage Pro maintains a precise level of temperature control (+/- 1.0 °C)
- No more spillages - stopper vials automatically with the optional pneumatic stoppering option
- Secure data storage and trending software option - ethernet-enabled for effortless data sharing
- Integrated performance and leak testing - ensures the system is always working optimally
- Fully customizable - up to ten thermal treatment and twelve drying steps for the ultimate recipe customization]
Key Features
• Experience the advantages of a tray dryer in a benchtop unit
• Operate the unit using Intellitronics’ vivid, full-color touchscreen
• Receive alarm alerts via email
• Stopper vials automatically with the pneumatic stoppering option
• Condense up to 4 liters of ice over 24 hours
• Order with up to three (3) usable shelves
Manufacturer's Specifications:
Shelf temperature control Range* |
-55°C to 60°C |
Lowest shelf temperature† (50 Hz / 60 Hz) |
-62°C / -65°C |
Shelf pull-down from 20°C to -40°C‡ |
≤ 30 minutes |
Temperature uniformity¶ | ± 1.0 °C |
Lowest condenser temperature† (50 Hz / 60 Hz) |
-82°C / -85°C |
Maximum condenser capacity | 6 L |
Maximum ice condensing capacity in 24 hours\\ |
4 L |
Maximum deposition rate\\ | 0.17 L/hour |
Vacuum rate of rise | ≤ 60 mT/hour (≤ 0.08 mbar/hour) |
Number of compressors | 2 |
Compressor horsepower | 0.333, 0.75 |
Utility Requirements | |
Compressed air (stoppering option only) |
60–90 psig (4.1–6.2 bar) |
Approx. peak heat generated (with vacuum pump) |
7,000 BTU/h (2 kW) |
Approx. peak heat generated (without vacuum pump) |
6,000 BTU/h (1.8 kW) |
Genevac SP Scientific nXDS6i Dry Scroll Pump
The Genevac SP Scientific nXDS6i dry scroll roughing/backing pump has a pumping speed of 3.6 cfm (6.2 m3/hr), and an ultimate vacuum of 0.015 Torr (0.020 mbar). It has KF-25 (NW25) inlet and outlet ports. It requires 100-240 VAC single phase power and has a standard C14 power connector. The nXDS6i draws 10A@120VAC (6A@240 VAC). The nXDS6i scroll pump produces a noise level up to twenty times less than competing products at 52 dB(A). The pump has an onboard inverter controller which allows the pump to be controlled either manually with easy to use push buttons, or remotely
The nXDSi integral pump controller monitors power and temperature, and will protect the pump in the event of operation under sustained high load or under fault conditions. The pump controller has a unique feature to control the speed of the pump in standby mode to 70% of full speed or with other push buttons to increase or decrease pump speed to save wear and tear on tip seals and bearing service life. The logic interface is designed to support RS232/RS485 serial or parallel control and monitoring through the DB15 connector.
Manufacturer's Specifications:
Nominal rotational speed |
1800 rpm |
Displacement |
6.2 m3h-1 / 3.6 ft3min-1 |
Peak pumping speed |
6.2 m3h-1 / 3.6 ft3min-1 |
Ultimate vacuum (total pressure) |
0.020 mbar / 0.015 Torr |
Minimum standby rotational speed |
1200 rpm |
Speed control resolution (percentage of full rotation speed) |
1% |
Pumping speed at minimum rotational speed |
4.1 |
Maximum continuous inlet pressure |
200 mbar |
Motor power 1-ph |
260 W |
Power connector 1-ph |
IEC EN60320 C13 |
Recommended fuse |
10A, 250Vac rms |
Weight |
26.2 kg / 58 lb |
Inlet flange |
NW25 |
Exhaust flange |
NW25 |
Noise level |
52 dB(A) |
Vibration at inlet flange |
< 4.5 mms-1 (rms) |
Leak tightness (static) |
< 1x10-6 mbar ls-1 |
Operating temperature range |
10 to 40 °C / 41 to 104 °F |
Electrical Requirements |
115/230V |
Testimonials
“REUZEit has been a great partner for our used equipment needs and always provide timely updates of new arrivals of consigned equipment.”
“Great company to work with. Tammy completed our first international equipment shipment with ease.”
“Fast response, open to adjusting schedule as needed, and great customer interaction.”