Shimadzu Prominence Ultra Fast Liquid Chromatography UFLC HPLC System

Shimadzu Prominence Ultra Fast Liquid Chromatography UFLC HPLC System

***This unit was tested as far as we could. We don't have the software to fully test this UFLC HPLC System. Instruments power on without errors. Unit has slight wear from normal use. (CBM 20A & DGU-20A5R is missing front panel cover). Buyer can expect everything pictured with 30-day warranty. See photos for details.

includes:

• Shimadzu SIL20AC HT Prominence Auto Sampler
• Shimadzu CTO-20AC Prominence Column Oven
• Shimadzu LC-20AD Prominence Liquid Chromatograph (Qty: 4)
• Shimadzu DGU-20A 5R Prominence Degassing Unit
• Shimadzu CBM-20A Prominence Communications Bus Module
• Shimadzu FCV-11AL Valve Unit
• Shimadzu Reservoir Tray 

The Shimadzu Prominence is a HPLC system that meets the demands of many of today’s advanced users. Many analysis techniques use LCMS, which requires a front-end HPLC system to provide solvent delivery performance in the micro to semi-micro range and injectors with low sample carryover.

• HPLC systems are currently used in a wide variety of fields. Higher reliability in analysis data and higher efficiency in total analysis workflow are required for faster development of new drugs, for better food safety, and for meeting higher standards in environmental regulations. Many analysis techniques use LCMS, which requires a front-end HPLC system to provide solvent delivery performance in the micro to semi-micro range and injectors with low sample carryover. Prominence is a network-ready HPLC system that meets the demands of today’s advanced users. Prominence features the world's first Web control, fastest sample injection, and highest detection sensitivity performance…functions that surpass current HPLC technology.

• Capable of system pressures in excess of 9500 psi (66MPa), and accompanied by the XR lineup of columns that features a choice of seven bonded phases, the Prominence UFLCXR delivers powerful high-pressure analysis–without sacrificing performance, reliability, or ruggedness. Utilizing standard components, Prominence UFLC raises total system productivity by generating high-quality, reproducible data without compromise.

• Key components include SIL-20A/AC autosamplers, which deliver virtually zero carryover and a cycle time of just 10 seconds, LC-20AD/AB/AT Pumps, which provide unmatched gradient speed and precision, CBM-20A/Alite–The world’s first web-based controller, the CBM enables users to setup, control, and monitor their HPLC remotely; the speed of these controllers makes them ideal for ultrafast LC, SPD-20A/AV/M20A UV/PDA Detectors, which ensure fast sampling with exceptional sensitivity and stability, RF-20A/Axs Fluorescence Detectors–The highest sensitivity levels, to meet the demanding analysis requirements of trace-level components while retaining the acquisition speeds necessary for ultrafast analysis; other detector options include ELSD, RID, and CDD.

SIL-20AC 

• The SIL-20AC is equipped with a sample cooler with a built-in dehumidifier to minimize condensation problems. Samples can be maintained at a fixed temperature from 4ºC to 40ºC. Temperature equilibration is rapid and uniform, so heat or cold sensitive sample constituents remain stable.

CTO-20AC

• The CTO-20A is a forced air-circulation-type column oven. It can regulate the temperature in a range going from 10 deg. C above room temperature to 85 deg. C. The CTO-20AC, using an electronic cooler, can regulate the temperature in a large range going from 10 deg. C below room temperature to 85 deg. C. In addition to the column, various other parts and units can be accommodated, including a manual injector, gradient mixer, high-pressure flow-line selection valves, a conductivity-detection cell block, and a reaction coil.

•  Removing dissolved gases in mobile phases is an important step for ensuring proper function of pump check valves, and to prevent outgassing in the detector flow cell. The degassing units feature extremely efficient degassing in a low-volume, compact design. Each degassing unit can be powered by a LC-20A or LC-30A series pump, and the pump control panel can display the degassing unit vacuum level.

 CBM-20A

• The CBM-20A/20Alite is a system controller equipped with a data buffering function and acts as an interface for connecting LC workstations, network-client computers, and analytical instruments via Ethernet. Up to eight units can be connected to the box-type CBM-20A. The card-type CBM-20Alite is used by incorporating it into an LC-20A-Series solvent delivery pump or auto-sampler. It can control up to five units, including the unit in which it is incorporated.

FCV-11AL

• The FCV-11AL/FCV-11ALS provide switching between two solvents. The FCV-11AL can supply up to three solvent delivery units, whereas the FCV-11ALS is used for one unit. It can be controlled from the LC-20AP/20AR front panel directly or through a system controller CBM-20A/20Alite and workstation software.
• Capable of switching solvents using solenoid valves.