Agilent Microplate Centrifuge with Loader Model G5582A

Agilent Microplate Centrifuge with Loader Model G5582A

***This instrument has been tested to meet factory specifications. Buyer can expect a working machine and 30-day warranty.  Unit has slight wear from normal use. Software NOT included. See photos for details.

The Agilent Microplate Centrifuge is a small, robot-accessible automated centrifuge that provides both vibration and noise control in a low-maintenance package offering stable high-speed centrifugation for 3 second cycle times.

Ideal for high- or medium-throughput applications such as PCR purification, cell harvesting, and air bubble removal in high-density microplates, the Microplate Centrifuge is capable of rapid customizable acceleration and deceleration, minimizing the required cycle time. With a 3 second loading time and robust motion control, the Microplate Centrifuge can be accessed by most laboratory microplate handlers/robots.

• Compact footprint takes up very little bench space and fits easily into integrated systems.
• Automated centrifuge loader and high-throughput door design allow integration with many robotic systems.
• Stackable design increases system throughput without adding to the footprint.
• Dampening isolates vibration from mounting surface and minimizes impact on adjacent instruments.
• includes microplate loader facilitates microplate handoff and placement into one of two internal centrifuge microplate carriers.

Manufacturer's Specifications:

• Spindle speed: 0–3000 RPM
• Maximum centrifugal force on plate: 1000 x g
• Maximum imbalance: 10 grams If you require a higher balance tolerance,
• Maximum mass of each microplate: 250 grams
• Acceleration: 0–2000 RPM in 5.0 seconds /0–3000 RPM in 7.5 seconds
• Deceleration L: 2000–0 RPM in 5.0 seconds / 3000–0 RPM in 7.5 seconds
• Loader maximum speed:
  • y- axis 760 mm/s
  • z- axis 380 mm/s
  • Gripper open/close 80 mm/s

Compressed air requirements

The Centrifuge with Loader requires the use of clean, dry, compressed air to move the pneumatic components. The compressed air can be from the following sources:

• Centralized source (laboratory)
• Compressed- air cylinders
• Portable pumps

The minimum compressed- air requirements are:

• Quality Clean, dry, compressed.
• Flow rate and pressure 0.5 LPS at 550 kPa (1 cfm at 80 psi)

User Manual