Velp Chemglass Heating Magnetic Stirrer AREX 6 Digital Pro CG-1997-V

The AREX-6 Digital PRO has two independent safety circuits that switch-off the heat preventing possible hazards in the event of overtemperature (higher than the set point). When the plate temperature is 50 °C the display will show a residual hot plate message preventing potential burning or injury. The probe detection alarm of the AREX-6 Digital PRO detects that the external probe is not immersed in the medium and stops the heat, preventing damage to the sample. The 135 mm diameter top is protected from chemicals and scratches by the superior resistant CealTop™ ceramic coating.

 

Two precise turning knobs control the temperature and speed settings, to start the heating function it is necessary to tap the knob ensuring complete safety. By tapping both knobs at the same it is possible to access to the advanced menu for the most suitable configuration of all operating modes. Temperature range is from room temperature to 370 °C.

 

The timer can be set from 1 min up to 99 hours and in the advanced menu is possible to configure it as follows:
Snap: Timer countdown starts as soon as one main function (temperature/speed) is on
Set P: Timer countdown starts when temperature set point is reached.

 

The central button permits to set the timer in order to save time to operator and enabling unsupervised work. The Auto-reverse option enhances the kinetics by changing the direction of the stirring direction. Is also possible to set the change in direction at a preferred interval of time. The AREX-6 Digital PRO has resistant die-cast housing, and the run-off grove protects all the internal parts of the instrument from potential damage in the event of a spillage.