Powervar ABC15.0-20D40Y Series 2000 GPI Global Power Interface

The Powervar Global Power Interface (GPI) Series 2000 Power Conditioners incorporate a low impedance isolation transformer, as well as a surge diverter and power line filter to eliminate noise, spikes, and transients before they have a chance to wreak havoc on your equipment. Voltage distribution and conditioning all in one solution. Standard equipment includes safety interlocks, emergency machine off (EMO), casters, and lockout/tagout breaker. EMO, safety interlocks, lockout/tagout breaker, and casters are standard on all models.

Specifications

• Model ABC15.0-XXD20Y
  
• Input Voltage 208/240/480/600 delta connection (4 wire)
  
• Output Voltage 208/120 wye (5 wire)
  
• Frequency 60 Hz. only
  
• Continuous Capacity 15 kVA
  
• BTU/Hr. Output 1536
  
• Efficiency > 97% (at full load, unity power factor)
  
• Step Load Change + 0.8% (at unity power factor)
  
• Noise Rejection With unit under power and the isolation transformer configured for a transformation
  
• ratio of 1:1 and with an ANSI/IEEE C62.41, Category A pulse applied either normal mode
  or common mode at the input, the noise output voltage will be less than 10 volts normal
  mode and less than .5 volts (½ of one volt) common mode in all four quadrants
  (CM-NM, NM-NM, CM-CM, NM-CM).
  
• Surge Voltage Withstand Tested under power to ANSI/IEEE C62.41, Category A & B (formerly IEEE587-1980).
  
• Power conditioner tested to withstand up to 6000 volts @ 3000 amp ringwave and unipo
  lar impulse.
  
• Construction Materials Transformer wires are copper and insulated with Class H materials.
• Windings are insulated with Nomex paper insulation before vacuum varnishing. Internal wiring is a mini.
  
• mum of 200 degree C rated and sleeved with Class H materials. Grain oriented
  
• silicon iron cores are constructed using 14 mil. laminations interleaved one to one. Eddy
  
• currents are minimized and external magnetic fields are below 0.1 oersted (at 12 inches
  distance in any direction).
• Unit is RoHS compliant.