Labnet FastPette V2 P2000 Pipette Controller

This revolutionary battery powered pipette controller works with glass and plastic pipettes in the 1 to 100 ml range. The Labnet FastPette V2 P2000 pipette aid was designed with the user in mind. It has a lightweight handle with smooth push-buttons and ergonomically located switches.

• Works with pipettes from 1 ml to 100 ml
• High aspiration speed - 25 ml in 4 seconds
• Cordless work for up to 8 continuous hours
• Ergonomically designed

Adjustable Aspiration Speeds

The aspiration speed can be set to high or low to adjust for the volume of the pipette and viscosity of the liquid. The suction can also be adjusted by the amount of pressure applied to the trigger button. Dispensing can be carried out by gravity or supported by the pump, which empties the pipette with a blow out step.

The Labnet FastPette V2 P2000 pipette controller is protected from the entrance of liquids by both a PTFE filter and a safety valve. To protect samples from cross contamination, both the filter and pipette holder are easily exchanged and autoclaved.

Thermal Protection Systems

When fully charged, the Labnet FastPette V2 P2000 pipette controller can be used continuously for eight hours. When the low battery light is lit, the unit should be recharged. Should the charge run out while working with the pipette, simply attach the power supply and continue to use. The battery is protected against over charging by timing and thermal systems. 

Manufacture Specifications: