Sartorius Stedim Biowelder Tube Welder

Sartorius Stedim Biowelder Tube Welder

**This item has been tested for basic power on functionality.  Unit has visible wear from normal use.  See photos for details.

The BioWelder works with a thermal welding cycle that does not require the use of a laminar flow. In this welding process the blade is kept sterile and endotoxin free throughout the whole process. 

The inserted hoses will be cut by a blade and then fused together through the unit.  The cycling process is completely automated and will only be released after a complete cycle.

Different programmable holders make it possible to weld thermoplastic hoses of the same type together (such as C-Flex, Sanipure, Pharmed) with diameters of 6.4 mm (1/4”) up to 19.0 mm (3/4”).

Features:

• Fully automated operation
• Welds thermoplastic tubing up to 3/4 inch O.D
• Preinstalled settings for C-Flex, Raumedic FluiSoftTM, AdvantaPure, AdvantaFlex, Pharmed and Sanipure tubing
• True thermal weld provides exceptional strength
• Aseptic connection without a laminar flow hood
• Data output by a printer
• Compact design, portable
• Easy to validate, with validation equipment
• Can weld many different tube diameters

Manufacturers Specifications:

• Housing: stainless steel
• Interface: RS232 for printer
• Blade: Cr-Ni-Alloy, single-use
• Ambient Temperature 20°C–30°C (ideal: 22°C)
• Relative Humidity: 20%–80% (ideal: 60%)
• Temperature Sensor: Type K, calibration
• Max. Tube OD: 3/4“
• Min. Tube OD: 1/4“
• Welding Cycle: 60–90 sec. depending on tube dimension