Thermo Dionex ASE 150 Accelerated Solvent Extractor P/N 082990

Thermo Dionex ASE 150 Accelerated Solvent Extractor P/N 082990

The Thermo Scientific Dionex ASE 150 Accelerated Solvent Extractor is a system for extracting either organic or inorganic compounds from a variety of solid or semisolid samples at a variety of pH values. The Dionex ASE 150 can be used with organic solvent, aqueous buffer, water, and small amounts of mineral acids. The Dionex ASE 150 accelerates the traditional extraction process by using solvent at elevated temperatures and pressures. Pressure is maintained in the sample cell to maintain the heated solvent in a liquid state during the extraction. After heating, the extract is rinsed from the sample cell into a collection vessel and is ready for analysis.

The Dionex ASE 150 is designed to minimize the amount of solvent used without sacrificing extraction speed or ease of operation. Samples are extracted one at a time, and the extraction process is typically completed in 15 to 25 minutes. All functions are controlled from the Dionex ASE 150 front panel. Built-in safety diagnostics monitor the system during operation. If a problem
occurs, the front panel displays an error message that identifies the problem. In addition, the method currently running is aborted and basic system functions are shut down until the situation is corrected.

**This unit has been tested for basic functionality.  Drip tray is missing. Everything pictured is included. See photos for details.

Manufacturers Specifications:

• Typical Operating Power: 500 W
• Maximum Operating Power: 1000 W
• Maximum Line Draw: 8 A at 110 VAC
• Fuse Requirements: Two IEC127 fast-blow fuses (P/N 954746) rated at 10 A
• Operating Temperature: 4 to 40 °C (39 to 104 °F)
• Operating Humidity: 5% to 95% relative humidity (noncondensing)