3D ms ProCure 350 UV Chamber CLEARANCE! As-Is

The ProCure 350 UV Chamber provides the final step for post-processing SLA parts. Initial post-processing of an SLA part includes the following: 350 IV cure box from 3D systems

• Drain excess resin
• Clean with TPM and/or isopropyl alcohol (IPA)
• Remove supports
• Dry with compressed air

After initial post processing is complete and all excess resin has been removed, the SLA part can then be placed into the ProCure 350. Within the 350, the SLA part is exposed to ultraviolet (UV) light for a specified period of time for final “curing”. The interior of the 350 is equipped with an array of UV lamps, reflective surfaces and a turntable which revolves at one revolution per minute. This ensures uniform exposure of all part surfaces to UV light and complete curing of the entire part.

Manufacture Specifications:
Front Loading Door 40 x 36.8 cm (15.75 x 14.5 in.)
Viewing Window 10.9 x 10.9 cm (4.31 x 4.31 in.)
Turntable Speed 1 RPM
Turntable Platen Diameter 35.8 cm (14.1 in.)
UV Source Type TLK 30W / 10 actinic fluorescent bulb.
Wavelength 300 nm to 460 nm
Type TLK 30W / 03 super actinic fluorescent bulbs
Wavelength 380 nm to 480 nm